Windows 10 iscsi initiator download

Initiator service — This is the service behind the actual work. Step 5: Connect to the iSCSI array Now that you have the initiator software installed, you need to tell it where to look for mountable volumes. From the initiator, choose the Discovery tab, shown in Figure B. On the Discovery tab, click the Add button under the Target Portals box. The default communication port for iSCSI traffic is Unless you have changed your port, leave this as is. If you have configured CHAP security or are using IPSec for communication between your client and the array, click on the Advanced button and make necessary configuration changes.

The Advanced Settings dialog box is shown in Figure D. Note that, at this point, you're not connecting to an actual volume, but only to the array in general.

Figure E Figure E The target portal has been added to the initiator. To see the list of available targets on the array you selected, choose the Targets tab, shown in Figure F. To connect to an available target, choose the target and click the Log On button. A window pops up Figure G with the target name and two options from which you can choose. Once you finish making decisions regarding how you want to connect to your target, from the Log On To Target window, click the OK button.

The target status in the imitator window should change to Connected. Figure H Figure H The target is now connected. If you want to choose individual targets to bind, click the Add button. However, you will need to know the target's drive letter or mount point. At this point in these instructions, we haven't gotten quite that far.

No chap definition.. This thread is locked. You can follow the question or vote as helpful, but you cannot reply to this thread. I have the same question Report abuse. Details required :. Cancel Submit. Jessen P. Hi, Thank you for being part of Microsoft Community.

Before you install the iSCSI initiator on any of your servers or workstations, you must have something to which the initiator will connect. For more information about building a SAN on the cheap, take a look at:. By doing so, you simplify troubleshooting and configuration later on.

If you've created a separate physical network or VLAN for storage traffic, assign this adapter an IP address that works on the storage network. By placing storage traffic on its own network that is routed separately from the main network, you increase the overall security of your storage infrastructure and simplify the overall configuration.

Depending on the operating system you're using, you may need to download Microsoft's iSCSI initiator software. If you're connecting from a Windows Vista or Windows Server computer, Microsoft's iSCSI initiator is included with these operating systems, so you can safely skip this step.

Make sure to download the initiator that is designed for your operating system. Microsoft provides builds for both bit and bit Windows. In the bit category, versions are available for both xbased processors and Itanium-based processors. If you have a target that supports Microsoft's MPIO check with your manufacturer , you should enable this option.

This site is not directly affiliated with Rocket Division Software. All trademarks, registered trademarks, product names and company names or logos mentioned herein are the property of their respective owners. All informations about programs or games on this website have been found in open sources on the Internet. All programs and games not hosted on our site.